mx3 pocket bike with neon
thіѕ іѕ аn gp mx3 pocket bike wіth neon I bουght thе bike οff οf minipocketbikes.com іt іѕ a fаntаѕtіс bike аnd wουld recomend buying one frοm thіѕ company I bουght thе neon strips аt wal-mart fοr 16 dollars each аnd i hаνе 4. I bουght thе stobe light set οf 2 аt autozone fοr 14 dollars. If уου hаνе аnу qυеѕtіοnѕ feal free tο qυеѕtіοn аlѕο im very sorry fοr thе horible sound аnd lighting i wіll bе redeployment another video asap
Here іѕ quarkdude’s 80c chinese motorized bike. It hаѕ a Boost Bottle industries boost bottle installed fοr more power. Fοr more іn rank аbουt motorized bikes visit www.motoredbikes.com
Video Rating: 4 / 5
January 25th, 2012 at 11:13 am
hey im with a bit of luck getting this bike and i want to place neon on it, i just want to know what was your power source?
January 25th, 2012 at 11:41 am
I went out and baught a rc car batterie with a charger and i place all the neon wireing together and place a male connection on the neon wires so it would fit into the female batterie pack
January 25th, 2012 at 12:17 pm
how are you powering that? i have the same bike and have been tiresome to find out a way to place neon on it so i took a battery pack w/ 3 AAA batterys but it only worked for possibly an hours then died… please answer
January 25th, 2012 at 12:34 pm
i have a Gp Mx3 i jus wanna know how are u powerin does lights
January 25th, 2012 at 1:24 pm
How are you powering all those lights?
January 25th, 2012 at 1:53 pm
first what are neon strips and strobe light sets cuz i needa to know all these so i can do it on mine too be specific please and will it be flashing cuz i dont like that please answer a.s.a.p
January 25th, 2012 at 2:49 pm
yea the neon is sticky but i also place some extra holding material on it you can get at walmart just to be safe i dont have a on and off switch yet but im putting one on so yea i got all my neon at walmart as well and my strobes at auto zone for like 13 bucks
January 25th, 2012 at 3:11 pm
@FPSAustralian1 for the sake of appearance,
January 25th, 2012 at 3:22 pm
serch …..Bicicleta con motor TranCitano por Av J.B Justo 1……
January 25th, 2012 at 3:26 pm
Hello download your video to place on a solo anal motor motobicicletas if you look at it is
January 25th, 2012 at 4:13 pm
What dose the Boost bottle do ?
January 25th, 2012 at 4:48 pm
@jewelrycasa Thanks duude! haha
January 25th, 2012 at 4:56 pm
@Gatorsrok
I used the 66c-70cc boost bottle. The “80cc” engine is really roughly about 67 or 68cc’s. The measured bore and stroke are close to that number even though they are sold as 80cc. Not sure why they do that but it is what it is.
January 25th, 2012 at 5:43 pm
@hissy08
I used the stock muffler apart from I cut a lot of the baffle out – not all of it – to allow a small backpressure. I know that there are some expansion chambers at boostbottleindustriesDOTcom. Never tried one of those. I just modded my stock muffler and it worked well.
January 25th, 2012 at 6:39 pm
which boost bottle did you get from the boostbottleindustriesDOTcom??? the 66cc-70cc? or the 78cc-80cc?? thx
January 25th, 2012 at 6:53 pm
what muffler
January 25th, 2012 at 7:41 pm
could u post a video or direct me to a video of how to install it?
January 25th, 2012 at 7:53 pm
I prefer to use the intake pipes sold on eBay that have a built in barb for a boost bottle. Looks cleaner, and you don’t have to tap anything. Plus they’re pretty cheap.
January 25th, 2012 at 8:31 pm
take the cap off u will get more power i did with mine
January 25th, 2012 at 9:19 pm
@MrJoesmoe49 . Now, when the intake valve closes, the kinetically charged air abruptly has nowhere to go, making a high-difficulty area.
January 25th, 2012 at 9:27 pm
It’s function is to absorb & release difficulty pulses within the intake vein, assisting engine breathing. Now an explanation of exactly what goes on involves a lot of physics and a excellent appreciative of fluid dynamics & difficulty zones, but can be clarified rather straightforwardly.During the intake stroke, air is sucked through the intake manifold and into the port at a considerable velocity. Because of this velocity, the air is said to have relative inertia
January 25th, 2012 at 10:01 pm
@jewelrycasa Does it go any quicker with the boost bottle? thanks
January 25th, 2012 at 10:31 pm
Holy crap, your drive chain looks sloppy loose in this vid… >_>
January 25th, 2012 at 10:40 pm
Clean I got one of these small engines for Christmas I just have to wate till spring to place it all together
January 25th, 2012 at 11:28 pm
something i have learned by using boost bottles is that they work better with shorter tubes
January 26th, 2012 at 12:20 am
take the clutch cover off, (on the left hand side of the motor) pack a small high temp grease on the gears, also on the inside of the cover were the mounting plate is.
This will stop that nasty rattle noise also stop the metal frictionsond, and inturn help you motor last longer,
Also take the end of your exhaust of and clean nearly the baffle and as far in you can reach with a rag, this will stop the build up of unburnt oil and inturn help you engine stay healthier for longer:)
January 26th, 2012 at 1:06 am
terrible exhaust!
January 26th, 2012 at 1:15 am
are theese any quick!? i seen them all over the place :p
January 26th, 2012 at 2:09 am
hey my clutch is not approaching in properly! any suggestions?
January 26th, 2012 at 3:08 am
nicely done. I’ve been checking some of these things out because they look like so much fun. Thanks for redeployment.
January 26th, 2012 at 3:42 am
so what is that a 2.5 litre tank? get the expansion chamber
January 26th, 2012 at 3:55 am
@jewelrycasa
Right but you can get jets compatible for them with no problem.